9.3
- Tommy Tran
- Kimberly Liu
Another iteration of stuffs. No major changes. Mostly manipulating geometry and sims settings.
Folder Path:
D:\Users\Roo\Documents\GrabCAD\MSXIV sims\MS-CHASSIS\Spring 2021 Reinforcement Sims
File Name:
October 2_Rev9.3
This project file was created using Rev 9.2 as the base project.
All 4 passenger masses were turned on.
October 3
Legend
check stress
check deformation
Next Steps:
check contacts on the large upper gusset - fix deformation issues
extend sheet metal to reduce stresses in front case? - need to fix these bonds
front 30 wall - model not showing up
Front Bar
Back Bar
Side 30 Wall
Side 60 Wall
A Pillar
B Pillar
C Pillar
Front 30 Wall
Front 60 Wall
Top 60 Wall
Top
Top 30 Wall
Combined Loading (Roll-Over) - Incomplete
It is the case with the pucks.
It needs to be setup using previous examples.
Advisor: Jason He
It is slightly lower priority because the combined loading condition could be interpreted as an average of multiple cases listed above.