Updated Master Assembly for MS14

Owned by Tommy Tran
Mar 14, 2021
1 min read

An updated master assembly of MS14’s mechanical vehicle design has been compiled beginning on March 14, 2021. The purpose of this was to create an updated assembly that can give a clear check for interferences of any parts or assemblies added to the vehicle’s design.

Here is a google sheet of the listed sub-assemblies that have been added and the file location of each component. If your component is not on this list, please add your item to this google sheet and add it to the master assembly. Remember to immediately upload the assembly onto GrabCAD so that it is updated on the MS14 GrabCAD Drive for others to use. Feel free to contact @Tommy Tran if you have any issues or questions.

https://docs.google.com/spreadsheets/d/1vi3a2uSjOXjf9CA9E0Og2hAZQDBAnwDY7XLVNuXhRNA/edit#gid=0