Assembly Instructions - Steering

Owned by Emily Guo (Deactivated)
Last updated: Sept 04, 2020
1 min read

Parent page for assembly instructions of the steering system.

Message Emily Guo for any clarifications on assembly.

All work instruction PDFs can be found under GrabCAD\MSXIV\Development\Dynamics\Steering\Work Instructions

Assembly Order

  1. Tie Rod Assembly

    1. Tube End Welding Jig

  2. Linear Bearing Assembly

  3. Rack Extension Assembly

    1. Rack Extension/Centerlink Welding Jig

  4. Centerlink Assembly

  5. Centerlink to Chassis Assembly

  6. Rack and Pinion Assembly

  7. Steering Column Lower to Chassis Assembly

    1. Lower Column Mounting Plate

  8. Steering Column Lower Assembly

  9. Steering Column Upper to Chassis Assembly

    1. Upper Column Mounting Plate

  10. Steering Column Upper

  11. Steering Arm to Upright Assembly

  12. https://uwmidsun.atlassian.net/wiki/spaces/MECH/pages/1555431809

The steering assembly can be installed following the listing above. The flow chart below is to help visualize the assembly process and the ones that can be done in tandem.