Steering Column Upper Assembly
- Emily Guo (Deactivated)
- Sien Kin Julien Hau Fai Tseung
Owned by Emily Guo (Deactivated)
Assembly instructions for the steering column upper assembly.
BOM
Part No | Description | Qty | Assembly |
|---|---|---|---|
1 | U joint 3/4” DD, 3/4”DD (PCE514-1001) | 1 |
|
2 | Steering Column Upper to Chassis Assem | 1 | |
3 | Steering Column Upper (Female) | 1 | |
4 | Steering Column Upper Shaft | 1 |
|
5 | Shear Pin (8538K14) | 1 |
|
Instructions
Insert the U joint (Part #1) into the lower column shaft. Tighten the set screws.
2. Insert the Upper Column (Part #3) through the 1” rod end of the Upper Column Mount Assembly (Part #2), and then into #1. Tighten the set screw of #1.
3. Insert the upper column shaft (Part #4) into #3.
4. Insert the shear pin (Part #5) into the hole of #3. It is sized to be interference fit so there might be some hammering required.
Done