Steering Arm to Upright Assembly
- Emily Guo (Deactivated)
- Sien Kin Julien Hau Fai Tseung
Owned by Emily Guo (Deactivated)
Assembly instructions for the steering arm to upright assembly.
BOM
Part Number | Description | Quantity |
|---|---|---|
1 | MSXIV-STR001-Steering arm | 1 |
2 | MSXIV-FSU015-Upright | 1 |
3 | M6 x 1.00-50 SHCS | 2 |
4 | M6 Locknut | 2 |
Instructions
Position the upright (Part #2) on the steering arm (Part #1) such that their holes align, as shown below.
2. Insert the screw (Part #3) into the hole of the steering arm. Place the nut (Part #4) onto the threads of #3 and tighten. Note that the head of #3 is on the steering arm face.
Top view of the tightened screw and nut
3. Repeat step 2 for the second hole by inserting a second screw and nut.
Top view of the 2 screws and nuts. Steering arm is transparent.
4. Repeat on the other side.
Done