2019-11-27 PCB Review

Josh:

• move traces away from holes
• label all the connectors
• not sending out for now → more validation may be needed

Jenny

• take out ground vias on through holes
• add them on empty pads
• align resistors
• label connectors
• 12V/GND layout
• make sure there are no unrouted nets
• test point 3V3
• test points for signals on bottom layer with labels

Liam

• make polygon pour not go through hole on top left screw hole
• bottom right hole
• label connectors
• DNP on schematic for carrier headers under CB