Chassis Reinforcement Attempt 1 meeting

Owned by Minqian Lu
Jul 13, 2021
1 min read

Slides https://docs.google.com/presentation/d/1QQaFrP_eXH-VLmBz8twwj8uvzSL7mxke4xi0hvFKOWw/edit?usp=sharing

Basic Synopsis: went in with the problem that my reinforcements

were adding stress. Came out of the meeting with some valuable feedback regarding the general solution direction. The two main things were

  1. This “replicate the bottom panel” solution path doesn’t seem to be working all that well. It doesn’t address the areas of high stress directly, instead, we are hoping for it indirectly to help which usually isn’t the safest bet. A potential counter solution could be returning to bare-bones chassis and individually addressing high-stress points with strategically designed tubes etc.

  2. get more eyes on our work, don’t be afraid to bug the advisors. We need to validate our work far more often to prevent lost time due to chasing down useless rabit holes

This doc has more notes