Lights Design [MSXV]
Component Selection Ideas
Drivers
IC LED DRIVER AL8860Q MSOP-8EP AL8860QMP-13 Diodes Incorporated | Integrated Circuits (ICs) | DigiKey (Rev 2 Driver is out of stock )
LM3404MA/NOPB Texas Instruments | Integrated Circuits (ICs) | DigiKey (Buck → $3.59)
PAM2841GR Diodes Incorporated | Integrated Circuits (ICs) | DigiKey (boost → $1.20)
https://www.digikey.ca/en/products/detail/diodes-incorporated/AL8843QSP-13/10668306 (probably using this one)
General op-amp
OPA 2197 OPA2197QDGKRQ1 Texas Instruments | Integrated Circuits (ICs) | DigiKey (old, out of stock)
MCP6007-E/MS Microchip Technology | Integrated Circuits (ICs) | DigiKey
MCP6002-E/MS Microchip Technology | Integrated Circuits (ICs) | DigiKey
Voltage Regulation (in stock!!!!)
https://www.digikey.ca/en/products/detail/diodes-incorporated/AS78L05ZTR-E1/4505037 (possible alt?)
NPN Tranistors (stock)
BCM53DSX Nexperia USA Inc. | Discrete Semiconductor Products | DigiKey
Inductor (stock)
SRU1048A-101Y Bourns Inc. | Inductors, Coils, Chokes | DigiKey
Changes
Make the led’s sequential
HW implemenation covered in Lights Research MSXV
Software solution is another possibility
Add reverse polarity protection with pnp (shouldn’t need the clamp part)
Potentially upgrade current mirror to Wilson/Full wilson Chapter 11: The Current Mirror [Analog Devices Wiki]
Maybe add in some thermal vias (probably not necessary thermal performance was fine)
Potentially add some test points for ease of validation/debugging