Ideal Diode [MSXV]

What is this document for?

Improvements to be made for the ideal diode board that will be used in MSXV.

General Notes

The circuit does have reverse polarity protection up to 24V so we may want to consider reverse polarity protection since we will be using > 100V.

From testing the board appeared to work and not have any heat problems. There was a higher drop for lower voltages compared to higher voltages

Not necessary but we could add some vias for thermal performance

Designs To Look At

Ideal diode/ORing controllers | TI.com

Readings

https://www.maximintegrated.com/content/dam/files/design/technical-documents/design-solutions/ds50-cut-your-losses-with-an-ideal-diode.pdf

https://www.ti.com/lit/an/slvae57b/slvae57b.pdf?ts=1641177275146

Data sheet

https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4359.pdf

Relevant Confluence Pages

Nomura Ideal Diodes