Upright and Spindle Instructions

Owned by Jackie Zhu (Unlicensed)
Last updated: Nov 18, 2020
2 min read

Number

Component

McMaster Part Number

Threading

Quantity

1

MSXIV-FSU015-Upright

 

 

1

2

MSXIV-FSU016-Spindle

 

 

1

3

UCA Spacer^Front Suspension ASM

 

 

2

4

LCA Spacer^Front Suspension ASM

 

 

2

5

CADMIUM-PLATED STL FLEX-TOP EXPANDING LOCKNUT

94235A090

 M8 x 1.25 mm

2

6

EXTREME-STRENGTH HEX HEAD SCREW

91029A109

 M8 x 1.25 mm Thread, 60 mm Long

2

7

MSXIV-FSU001-LCA

 

 

 

8

MSXIV-FSU007-UCA Housing

 

 

 

 

Images above are of Upright (#1)

 

Images above are of Spindle (#2)

 

  1. Press-fit Spindle (#2) into Upright (#1). Threaded side of the Spindle should pass through upright first with the wider side of the Spindle fitting nicely.    

     

     

  2. Attach Upright (#1) to the LCA (#7) using Hex Head Screw (#6) x 1, Locknut (#5) x 1, and 2 LCA Spacers (#4). First, orient the spacers, 1 between the upright and LCA the beneath the LCA. Then pass the screw through the spacers and finally attach the locknut to the end of the screw.

     

     

  3. Attach Upright (#1) to UCA Housing (#8) using Hex Head Screw (#6) x 1, Locknut (#5) x 1, and 2 UCA Spacers (#3). Like the previous step, insert the spacers between the Upright and the UCA Housing. Then pass the screw through, from the top, and attach to the locknut.

  4. Done