Solar Array Cutouts for Roof and Trunk
- Mohamed Goha
Owned by Mohamed Goha
Feb 04, 2021
1 min read
Loading data...
Task Background:
Given electrical team solar array positions, CAD cutout positions were created
Several images of the purchased stacks showed the positions of existing terminals
Refer to Pictures and dimensions and Final Array Layout for stack images
Updated Array & Stack Location/Correspondence:
A Look at the CAD Cutouts:
Roof Panel:
Trunk Panel:
To be Completed Section:
Array indent depth has not yet been confirmed for mold CAD (currently set at 2 mm)
GrabCAD Location:
MSXIV > Development > Aerobody > Solar > Solar Cutouts CAD