Assembly instructions for the upper column mount to chassis assembly.
BOM
Part No | Description | Qty | Assembly |
|---|---|---|---|
1 | Upper Column Mounting Plate | 1 | |
2 | 1”-12 RH Rod End, PTFE lined | 1 | |
3 | Steering Column Lower Assem | 1 | |
4 | 1”-12 Nut | 1 | |
5 | M8x1.25-45 SHCS | 2 | |
6 | M8 Flex Top Locknut | 2 |
Instructions
Position the bearing plate (Part #1) on the chassis, by aligning the 2 holes.
2. Insert the 2 screws (Part #5) into the holes of the chassis and through #1. Put the 2 nuts (Part #6) onto the screws and tighten.
3. Insert the rod end (Part #2) into the central hole of #1. The shank of the rod end should be flush with the top surface of #1. In this position, no threads should be visible when looking at the top surface of #1.
Put the nut (Part #4) onto the threads of #2 until it hits the bearing plate. Do not tighten.
Front view of the rod end. Chassis is transparent
Done 