Assembly instructions for the steering column upper assembly.
BOM
Part No | Description | Qty | Assembly |
|---|---|---|---|
1 | U joint 3/4” DD, 3/4”DD | 1 | |
2 | Steering Column Upper to Chassis Assem | 1 | |
3 | Steering Column Upper Column | 1 | |
4 | Steering Column Upper Shaft | 1 | |
5 | Retractable Spring Plunger | 1 |
Instructions
Insert the U joint (Part #1) into the lower column shaft. Tighten the set screws.
2. Insert the Upper Column (Part #3) through the 1” rod end of the Upper Column Mount Assembly (Part #2), and then into #1. Tighten the set screw of #1.
3. Insert the upper column shaft (Part #4) into #3.
4. Insert the spring plunger (Part #5) into the hole of #3.
Done 