...
Part No | Description | Qty | Assembly |
|---|---|---|---|
1 | U joint 3/4” DD, 3/4”DD | 1 | |
2 | Steering Column Upper to Chassis Assem | 1 | |
3 | Steering Column Upper Column | 1 | |
4 | Steering Column Upper Shaft | 1 | |
5Retractable Spring Plunger | Shear Pin (8538K14) | 1 |
...
Instructions
Insert the U joint (Part #1) into the lower column shaft. Tighten the set screws.
...
3. Insert the upper column shaft (Part #4) into #3.
...
4. Insert the spring plunger shear pin (Part #5) into the hole of #3. It is sized to be interference fit so there might be some hammering required.
...
Done 