Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Classcruiser
Length x Width x Height4.74 m x 2.10 m x 1.24 m
Weight362 kg
Array1213 W Silicon
Battery11.45 kWh Lithium Ion (42.3 kg)
Motors2 Mitsuba Hub 2096-D3
Wheels4 7075-Aluminum 16”
Chassiscarbon fiber composite

Apparently this car was designed by a furniture designer in SolidWorks who did absolutely no aero CFD at all.

Motor Controllers

At ASC 2018, they were using the Mitsuba motor controllers since they weren't able to get their WaveSculptor 22s working correctly.

Telemetry

At ASC 2018, their telemetry system consisted of a multimeter attached to their battery pack that they would read pack voltage off of and radio back, in order to get battery SOC.

Battery

They used VRUZEND battery holders, with locknuts instead of the included nuts. I think they also included rods rod through to secure the pack together and mitigate the effects of vibration?

We had evaluated these when designing MSXII, and had concerns with regards to reliability.

  • No labels