Convering ST-Link V2 Clones to Generic DAP

Open the USB case and solder the jumper wires to the pins.

Black magic probe out of cheap STLink programmers

VERY IMPORTANT: Get the jumper wire positions correct. May be different on different USB models

Flash this version onto the USB programmer.

https://github.com/devanlai/dap42/blob/master/FLASHING.md#dap103-stlinkv2-clone-dongle

May need to download DAP103-dapboot-combined-stlink.bin

https://github.com/devanlai/dap42/releases

Open