Notes:
-Changed the design to improve its strength and manufacturability.
-May need to add counterbores for the screw holes.
-Please verify if my fixtures are valid.
Material: 6061-T6 Aluminum, Yield Strength: 2.750E8 N/m^2.
Fixtures:
On flat faces to restrict planar movement
Interactions:
These virtual walls represent where the mount contacts the floor and screws respectively
Loading:
1.3 kN directed 6.9 degrees below the horizontal but multiplied by 2 as a safety factor
Mesh:
Results:
Note: Just for reference, the force is directed to the left in this image.
Next Steps: Can probably cut off chunks of material in order to reduce weight