What should MSXII look like?

This is a brainstorming page. If you have an idea for what MSXII could/should look like, make sketch and post a picture here. Absolutely anything goes... let your creativity run wild.

First Iteration

Click here to expand sketches...

Artist	Sketch	Comments
Devon Copeland
Devon Copeland
Tak Alguire		Drawing makes it seem tall, but could be a very low to the ground car like chest height. Still has doors Large flat portion on the top which doesn't bend down to the ground. Both panel sections would need to be removeable, with the larger section possibly being two pieces?
Minghao Ji		Drawn while riding a bus Focus on practicality and consumer-centric design Hinged battery compartment between passenger cell and rear wheel well Charging port Front boot for storage Isolated passenger cell Removable body panels/bumpers
Devon Copeland
Devon Copeland
Minghao Ji		V2 of bus drawing Dimensions inspired by BMW i8
Matt Suski		This is a picture of the Immortus. It's a solar car designed by an Australian startup that can theoretically run indefinitely.
Ron Tsang
Ron Tsang
Ron Tsang
Ron Tsang

Second Iteration

Following the mech meeting on 2016-09-18, we have decided on several key key feature that the design of MSXII's aerobody will adhere to:

MSXII will be a 2 door / 2 seat sport coupé.
The driver/passenger position will be mid vehicle or forward of the vehicle midline.
The battery will be in the rear of the vehicle (close to the motors) and should be easy to remove.
The aerobody should be designed to be made up of multiple panels.

All further sketches / design proposals should adhere to these constraints.

Artist	Sketch	Comments
Devon Copeland
Minghao Ji
Ritu Shah		I like the curbed look at both the front and the back, and the curbed space at the bottom. One front window and a side window is godI like the curbed look at both the front and the back, and the curbed space at the bottom. One front window and a side window is god