CAN

•  Loop back mode Mitchell Langdon Ostler
•  External Controller (Peak CAN) Jarvis Weng
•  Controller Board to Controller Board Jarvis Weng

GPIO_IT

•  General Hardware Verification Preston Glicerio Dresser

ADC

•  General Hardware Verification Mitchell Langdon Ostler

I2C

•  General Hardware Verification Adel Chinoy

SPI

•  General Hardware verification

Need SPI sensor to test further

Validation Steps

Status

Blockers

Outputs

•  Verify Operation of IO expanders using smoke test Adhiraj Singh Arvind Sanjay
•  Verify Operation of Load switches using bts_load_switch driver
•  Verify Operation of Outputs using Output Config

• Need output config merged for last verification

Fan Controllers

•  Develop Smoke Test
•  General hardware verification of Fan Controllers

Output Read verification

•  Verify Outputs are successfully read in main loop

Lights FSM verification

•  Verify by setting can messages internally
•  Verify by sending can messages over PEAK CAN

Power FSM Verification

•  Verify by setting can messages internally
•  Verify by sending can messages over PEAK CAN

Need all previous verified

Validation Steps

Status

Blockers

Load Switch

•  Check that load switches work, and isense can be read

Preston Glicerio Dresser

VBAT_Status