Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

Controller Board

Validation Steps

Status

Blockers

CAN

IN PROGRESS

GPIO_IT

IN PROGRESS

ADC

DONE

I2C

IN PROGRESS

SPI

  • General Hardware verification

BLOCKED

Need SPI sensor to test further

Power Distribution

Validation Steps

Status

Blockers

Outputs

  • Verify Operation of IO expanders using smoke test Adhiraj Singh Arvind Sanjay
  • Verify Operation of Load switches using bts_load_switch driver
  • Verify Operation of Outputs using Output Config

IN PROGRESS

  • Need output config merged for last verification

Fan Controllers

  • Develop Smoke Test
  • General hardware verification of Fan Controllers

IN PROGRESS

Output Read verification

  • Verify Outputs are successfully read in main loop

BLOCKED

Need gpio expanders verified

Lights FSM verification

  • Verify by setting can messages internally
  • Verify by sending can messages over PEAK CAN

BLOCKED

Need all previous verified

Power FSM Verification

  • Verify by setting can messages internally
  • Verify by sending can messages over PEAK CAN

BLOCKED

Need all previous verified

Telemetry

Validation Steps

Status

Blockers

HC-12

  • Develop basic tooling and verify connection/data transfer

IN PROGRESS

Getting hardware

LoFa

  • Develop basic tooling and verify connection/data transfer

UV Cutoff

Validation Steps

Status

Blockers

Load Switch

  • Check that load switches work, and isense can be read

Preston Glicerio Dresser

IN PROGRESS

VBAT_Status

  • Trigger Undervoltage conditions, see if it triggers interrupt.

  • No labels