...
Part No | Description | Qty | Assembly |
|---|---|---|---|
1Bearing plate upper | Upper Column Mounting Plate | 1 | |
2 | 1”-12 RH Rod End, PTFE lined | 1 | |
3 | Steering Column Lower Assem | 1 | |
4 | 1”-12 Nut | 12 | |
5 | M8x1.25-45 SHCS | 2 | |
6 | M8 Flex Top Locknut | 2 |
...
Put the nut (Part #4) onto the threads of #2 until it hits the bearing plate. Do not tighten.
09/19 Revision note: Not shown in photos, but add a second (#4) onto the rod end to act as a jam nut, tighten the second nut up against the first.
...
Front view of the rod end. Chassis is transparent
...