Page Comparison

• Finished milling steel flats, cut to-size +- 0.4mm (outside XV-BAT129 Steel_Cross_Bar cut -0.9mm). This issue will be fixed by welding. Disregard yesterday's 2mm undersize, that was a mistake

• Finished cutting angle irons - will be milled to-size by tomorrow 

• Worked with Machine Shop Guy to plan cutting holes into parts using mill - will finish tomorrow

• Validating Chassis Cross bar jig tomorrow by milling holes into a scrap 1/4" piece

• 1/4" Steel for Chassis Cross bar has not arrived yet. Will ping when metal arrives

• MDF for the enclosure jig is all cut! Thank you so much @jenna k

HUGE SHOUT-OUT TO @Jericho Mordasiewicz @Taylor Elena Avery Hazelwood @Jason Siu @Evan McMahon for all your help today and for coming in tomorrow to finishing up the milling, you guys are awesome : ))) I will ping you guys to tomorrow's instructions in this channel in a thread (edited) image.png 

Image Added

Thursday Manufacturing Instructions - Milling Holes @Evan McMahon @Jason Siu

6 replies

Image Removed

Nicole Choe  1 hour ago

1. Locate Stock Metal

image.png 

Image RemovedImage Removed

Nicole Choe  1 hour ago

1. Match Part# to Part drawing. Part #s are written in black ink and underlined twice.

4 files 

Image RemovedImage RemovedImage RemovedImage RemovedImage Removed

Nicole Choe  1 hour ago

1. Validate that you have the right part by measuring it with Calipers

Image Removed

Nicole Choe  1 hour ago

1. Mill holes into Parts. When you guys are done, send a message to the channel updating us on your progress

Image Removed

 (edited) 

Image Removed

Nicole Choe  1 hour ago

Note that WE DO NOT HAVE ANY EXTRA MATERIAL. I'd rather you guys make 3 perfect parts than make 8 parts that are bad. Quality first, we have time on the weekend if need-be

Image Removed

Nicole Choe  < 1 minute ago

***Just an FYI, the holes for drawings 132 and 133 are pretty critical so be extra careful to be within tolerance with those! - Shem (edited) 

Thursday Manufacturing Instructions - Jig Validation @Jericho Mordasiewicz

1 reply

Image Removed

Nicole Choe  1 hour ago

Locate Stock Metal, refer to Part Drawing to machine and mill holes. If you need help milling the holes, reach out to @Evan McMahon or the Machine Shop Guy. Work with @Vaibhav B, and send a message to the channel with your progress

Image Removed

2 files 

Image RemovedImage Removed

Thursday Manufacturing Instructions - Milling angle irons @Taylor Elena Avery Hazelwood @Jericho Mordasiewicz (edited) 

8 replies

Image Removed

Nicole Choe  1 hour ago

1. Locate Stock Material. DO NOT TOUCH THE ANGLE IRON TO THE RIGHT - that has already been milled

image.png 

Image RemovedImage Removed

Nicole Choe  1 hour ago

1. Match Part# to Part drawing. Part #s are labelled in photo (edited) 

5 files 

Image RemovedImage RemovedImage RemovedImage RemovedImage RemovedImage Removed

Nicole Choe  1 hour ago

1. Validate that you have the right part by measuring it with Calipers

Image Removed

Nicole Choe  1 hour ago

1. Mill Parts. When you guys are done, send a message to the channel updating us on your progress

Image RemovedImage Removed

Nicole Choe  1 hour ago

Note that WE DO NOT HAVE ANY EXTRA MATERIAL. I'd rather you guys make 3 perfect parts than make 8 parts that are bad. Quality first, we have time on the weekend if need-be

Image Removed

Shem Kim  3 minutes ago

Just an FYI, the holes for drawings 132 and 133 are pretty critical so be extra careful to be within tolerance with those!

1

Image RemovedImage Removed

Shem Kim  2 minutes ago

Tho worst comes to worst we can just make the holes bigger if it does come out of spec and we run into assembly issues

Image Removed

Shem Kim  2 minutes ago

But try to be within spec!

1

Image Removed

Thursday Manufacturing Instructions/Concerns - Thread

2 replies

Image Removed

Nicole Choe  1 hour ago

I will not be checking slack Thursday evening. If in need of assistance ping @Vaibhav B @jenna k or @Shem Kim in this thread  (edited) 

Image Removed

Nicole Choe  1 hour ago

Left markers here. The machine shop has measuring tape and callipers, the Machine Shop Guy will be happy to help you guys out 

IMG_5806 

Image Removed

Image Added

Image Added

Image AddedImage AddedImage AddedImage Added