Page Comparison

• Apparatus: Universal Testing Machine (UTM)

Image Removed

Image Added

Figure 1: Universal Testing Machine (UTM)

• Force versus crosshead displacement, force versus deflection data continuously, or at frequent intervals (around 2-3 recordings per second, with a target minimum of 100 recorded data points)

• If there are any initial failures, record force, displacement and mode of damage where the failure occurs. 

• Record mode, area and location of each failure. 

• Use the failure identification codes, shown in the figure below.

• Record the max force, failure force, head displacement and the deflection at the moment of ultimate failure. 

• For ultimate failure modes, record the mode, area and location of ultimate failure for each material. 

• Calculations:

  • For 3-Point Mid-Span Loading:

    • 
    • 
    • 

  • For 4-Point, Quarter-point loading:

    • 
    • 
    • 

  • For 4-Point (Third Point) Loading:

    • 
    • 
    •