...
Load rate used for Universal Testing Machine (UTM) was 0.5 mm/min.
Summary / Conclusions
Adhesive testing has found that surface preparation techniques have a profound effect on the adhesive’s strength. Degreasing provides a 46.55% stronger bond than using no surface preparation technique. Abrasion provides a 64.78% stronger bond than using no surface preparation technique.
Adhesive testing has also found that thorough and proper preparation of adhesive joints greatly influences whether it will result in utter failure or a superior bond.
Raw Data
Refer to the file “Adhesive Testing Data.xls” for the raw data outputted from the Universal Testing Machine
...
Surface Preparation | Average Max Shear Stress (MPa) |
|---|---|
None | 7.247280977 |
Degrease | 4.076408 |
Abrasion | 6.597827304 |
Table #3: Modified average max shear stress of each surface preparation technique excluding anomalies
Surface Preparation | Average Max Shear Stress (MPa) | Samples Included |
|---|---|---|
None | 3.369298 | None 1, None 3 |
Degrease | 5.4136745 | Degrease 1, Degrease 3 |
Abrasion | 6.597827304 | Abrade 1, Abrade 2, Abrade 3 |
Table #4: Percentage difference of surface preparation techniques compared to none based on Table #3 calculations
Surface Preparation | Percentage Difference (%) |
|---|---|
Degrease | 46.55318003 |
Abrasion | 64.78356007 |
Graphs of Single Lap Shear Test:
...