Following the mech meeting on 2016-09-18, we have decided on several key key feature that the design of MSXII's aerobody will adhere to: - MSXII will be a 2 door / 2 seat sport coupé.
- The driver/passenger position will be mid vehicle or forward of the vehicle midline.
- The battery will be in the rear of the vehicle (close to the motors) and should be easy to remove.
- The aerobody should be designed to be made up of multiple panels.
All further sketches / design proposals should adhere to these constraints. | Artist | Sketch | Comments |
|---|
| |
| | Minghao Ji | |
| | Ritu Shah | | I like the curbed look at both the front and the back, and the curbed space at the bottom. One front window and a side window is godI like the curbed look at both the front and the back, and the curbed space at the bottom. One front window and a side window is god | | Kristi Ng | | Focus: Have less curves, so that it's easier to manufacture and less strain when putting solar arrays
also, air vents on front and back for air circulation maybe | | | - Removed "pinch in" at the centre of the car in the original design to increase crush zone.
- Some curves along the side of the car to increase aesthetic appeal but still relatively flat - fibreglass mould will be easy to make
- Solar array mounts on surface with no compound curves
|
| 
.jpg?version=1&modificationDate=1474064005241&cacheVersion=1&api=v2&height=150)
