Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

This is a brainstorming page. If you have an idea for what MSXII could/should look like, make sketch and post a picture here. Absolutely anything goes... let your creativity run wild. 

First Iteration

ArtistSketchComments
Image Removed

Image Added


Image Removed

Image Added


Image Removed

Image Added

  • Drawing makes it seem tall, but could be a very low to the ground car like chest height.
  • Still has doors
  • Large flat portion on the top which doesn't bend down to the ground.
  • Both panel sections would need to be removeable, with the larger section possibly being two pieces?

Minghao Ji
Image Removed

Image Added

  • Drawn while riding a bus
  • Focus on practicality and consumer-centric design
  • Hinged battery compartment between passenger cell and rear wheel well
  • Charging port
  • Front boot for storage
  • Isolated passenger cell
  • Removable body panels/bumpers
Image Removed

Image Added


Image Removed

Image Added


Image Removed

Image Added

V2 of bus drawing

Dimensions inspired by BMW i8

Image Modified

This is a picture of the Immortus. It's a solar car designed by an Australian startup that can theoretically run indefinitely.

Second Iteration

Following the mech meeting on 2016-09-18, we have decided on several key key feature that the design of MSXII's aerobody will adhere to: 

  1. MSXII will be a 2 door / 2 seat sport coupé.
  2. The driver/passenger position will be mid vehicle or forward of the vehicle midline. 
  3. The battery will be in the rear of the vehicle (close to the motors) and should be easy to remove. 
  4. The aerobody should be designed to be made up of multiple panels. 

All further sketches / design proposals should adhere to these constraints. 

ArtistSketchComments