The following is the testing plan for MS14 composites, adhesives, and fasteners/joints.

Composites

Property	ASTM Standard Designation_Title	Test Status	Fixture Status
Flexure	C393_Flexural Properties of Sandwich Constructions	Research Phase	Design Phase
In-plane tension	D3039_Tensile Properties of Polymer Matrix Composite Materials	Research Phase	Not Started
In-plane compression	D3410_Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading	Research Phase	Not Started
Shear response	D3518_In-plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a +/- 45 deg Laminate	Research Phase	Not Started

Adhesives

Property	ASTM Standard Designation_Title	Standard Confluence Page	Testing Confluence Page	Test Status	Fixture Status
Peel strength	D903_Peel Strength of Adhesive Bonds
Shear strength	D905_Shear Strength of Adhesive Bonds
Impact strength	D950_Impact Strength of Adhesive Bonds
Lap shear bond strength	D5868_Lap Shear Bond Strength

Property	ASTM Standard Designation_Title	Standard Confluence Page	Testing Confluence Page	Test Status	Fixture Status
Failure modes	D5573_Failure Modes of Composite Joints
	?	Failure behaviour of honeycomb sandwich - Corner joints & Inserts - Mechanical - Confluence (atlassian.net)

Name	Tests	Notes	Status
3-point bend fixture?			Design Phase
Adhesive specimen curing fixture			Design Phase