The following is the testing plan for MS14 composites, adhesives, and fasteners/joints.

Composites

Property	ASTM Standard Designation_Title	Standard Confluence Page	Test Status	Testing Apparatus Required
Flexure	C393_Flexural Properties of Sandwich Constructions	ASTM C393_Standard Test Method for Shear Strength	Research Phase	Design Phase
In-plane tension	D3039_Tensile Properties of Polymer Matrix Composite Materials	Standard Test Methods for Tensile Properties	Research Phase	Not Started
In-plane compression	D3410_Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading	Standard Test Method for Compressive Properties of Polymer Matric Composite Materials	Research Phase	Not Started
Shear response	D3518_In-plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a +/- 45 deg Laminate	Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test	Research Phase	Not Started

Adhesives

Property	ASTM Standard Designation_Title	Standard Confluence Page	Testing Confluence Page	Test Status	Fixture Status
Peel strength	D903_Peel Strength of Adhesive Bonds
Shear strength	D905_Shear Strength of Adhesive Bonds
Impact strength	D950_Impact Strength of Adhesive Bonds
Lap shear bond strength	D5868_Lap Shear Bond Strength

Property	ASTM Standard Designation_Title	Standard Confluence Page	Testing Confluence Page	Test Status	Fixture Status
Failure modes	D5573_Failure Modes of Composite Joints
	?	Failure behaviour of honeycomb sandwich - Corner joints & Inserts - Mechanical - Confluence (atlassian.net)

Name	Tests	Notes	Status	Design DRI
3-point bend fixture?			Design Phase	Vansh, Jeff, Min
Adhesive specimen curing fixture			Design Phase	Ethan, Yanshen, Winnie