Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Controller Board Validation

Board IDBlinking LEDsTutorial Board: ADCTutorial Board: Button Press
1
  • Not Working
  • Not Working
  • S1 Green Button Works
  • S2 Yellow Button does not work
    • PB4 Yellow does not turn off
2
  • Working
  • Working
  • PB3 Red shorted
    • Bright light when off
  • PB4 Yellow shorted
    • Dim light when dured off
3
  • Working
  • Not working
    • Stuck around 1870
  • Working
4 (Dead board?)
  • Not working
    • No LEDs work
  • Not Working
    • Does not even show ADC
  • Buttons do not work
5 (Dead board?)
  • No LED (Program unable to find device)
  • Not working
    • Does not show ADC
  • No LED are turned on
6(Dead board?)
  • Nothing works for this (Program is never able to find the device)


7
  • Works
  • Works
  • Works
8
  • Works
    • However PA15 does not blink
  • Works
  • Works
9 (Cannot read)
  • Not Working
  • Not Working
  • Not working
10 (Cannot read)
  • Doesn't work; LEDs are always blinking when plugged in even when blinking LEDs program is not run
  • Not Working
  • Not Working




Benchmark

Testing lights: Use any controller board works

ADC: Controller board 8 + Tutorial board 2

Buttons Press: Controller board 8 + Tutorial board 5

  • No labels