Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 3
Next »
Design Projects
| Project | Tasks | Estimated Duration | Priority | Leads |
|---|
| Pedal Board | - Use CAN to communicate with the main system
- Consider using a potentiometer instead of the existing magnetic sensor
- Talk with the mechanical team able any board dimension change
| 2 Months | High | Kelly & Jenny |
| Steering Stalk | - Use CAN to communicate with the main system
- Make sure the new steering stalk has sufficient mechanical clearance
| 2 Months | High | Kelly & Aashmika |
Center Console | - Use CAN to communicate with the main system
- Resign the buttons for greater electromagnetic interference immunity
| 2 Months | High | Kelly & Liam |
| Telemetry | - Find a router and a LTE shield for Telemetry
| 2 Months | Medium | Pei |
| BMS AFE | - Redesign for higher discharge capability and more reliability
| 2 Months | Medium | Taiping |
| BMS Carrier | - Implement a kill switch with greater electromagnetic interference immunity
| 2 Months | Medium | Taiping |
BMS Current Sense | - Higher accuracy by using a different ADC
| 2 Months | Medium | Taiping |
| Controller Board | - Consider using a different microcontroller
| - | Low | Kelly |
Validation & Integration Projects
| Project | Tasks | Estimated Duration | Priority | Leads |
|---|
| Motor Controller Interface | - Investigate the communication issue with the motor controller
| 2 Weeks | Very High | Hanna |
Solar Sense | | 1 Month | Medium | Pei |
Power Distribution | - Finish the board bring-up
- Validation & Integration
| 2 Weeks | High | Kelly |
| Driver Display | | 1 Month | Medium | Hanna |
| Pre-Charge | | 1 Month | Medium | Hanna |
| EV Charger | | 2 Weeks | Medium | Hanna |