The following items are REQUIRED to be included in the MSXV dashboard design (from a centre-console hardware point of view). This page should be updated as changes or decisions are made.
Let me (Jonathan Xie) know if I missed anything or you’d recommend alternatives.
LED Displays
The following 7-segment displays should all be located next to each other, preferably stacked one on top of the other, from top to bottom order based on the order presented in the table:
Element | Actual Device | Colour | Image | Link | |
|---|---|---|---|---|---|
| 1 | Speedometer | Large, 3-digit 7-segment display (37.60mm x 19.00mm x 8.10mm) | GREEN | https://www.digikey.ca/en/products/detail/kingbright/BA56-12GWA/3084327 | |
| 2 | Cruise Control Target Speed | Small, 3-digit 7-segment display (12.80mm x 30.02mm x 7.00mm) | RED | https://media.digikey.com/pdf/Data Sheets/Lite-On PDFs/LTC-4624JR.pdf | |
| 3 | Battery Voltage | Small, 3-digit 7-segment display (12.80mm x 30.02mm x 7.00mm) | RED | https://media.digikey.com/pdf/Data Sheets/Lite-On PDFs/LTC-4624JR.pdf |
Button | Symbol | |
|---|---|---|
| 1 | Push to start | O (see above) |
| 2 | Hazard Lights | Δ |
| 3 | Drive State | D |
| 4 | Neutral State | N |
| 5 | Reverse State | R |
| 6 | Regen Braking | ??? |
Additional LED Indicators:
The following indicators do not require buttons on the dashboard itself to activate, as they will be controlled by the steering stock or battery detection system. However, a light-up indicator (LED + frosted translucent material in an appropriate symbol/shape) will need to be displayed on the dashboard.
Indicator | Colour | |
|---|---|---|
| 1 | Left Turn signal | ??? |
| 2 | Right Turn signal | ??? |
| 3 | Headlights on/off | ??? |
| 4 | Cruise Control on/off | ??? |
| 5 | BPS (Battery Protection System) Alert | ??? |
Back-up Camera LCD
(there will be a Raspberry-Pi powered LCD for the backup camera, but I have no clue about those dimensions and specs, Former user (Deleted) pls help)