Goal:
Design and optimize the foam plug (2 halves, left and right side) for the main Aerobody mold, as shown in figure 1, then break it up into machinable parts that can fit within our foam blocks, as shown in figure 2.
Mold Process:
Once the foam plug is machined and assembled, then we’ll a fiberglass wet layup to create a strong and reusable female mold of the car, shown in figure 3. Once the female fiberglass mold is complete then we do a carbon fiber infusion
Ideas On How To Optimize For Cost:
We could try to reduce foam costs by removing foam from the blue area as shown in figure 4. Any ideas are welcome to attempt and reduce the cost of the mold while still maintain it’s original purpose.
Helpful Training Packages:
Please see Molds 101 and Surface Modelling 101 training sessions with the links down below, they will do a great job of showing how to make a proper mold!
Molds 101: Molds 101 Session Concepts and Modelling (10-02-2022)
Surface Modelling 101: Surface Modelling 101
Aero Model: