Mech Onsite Spring 2021

July 5 - 11

Chassis: (All done!)

• Access to Welding Room

• Finish sanding & assembling jigs (done)

• Drop off parts for welding

• Assembly more jigs

• Welding components onto Chassis

Aero: (Bleeding into week of July 12 - due to booking conflicts with Waterloop)

• Side Panel Molds ready by the end of this week for layup

Battery Box:

• Continue module manufacturing
  

July 12 - 18

Chassis:

• Pick up waterjet parts - End of the week

• Sand chassis, assemble more jigs

• Schedule welding in E5 - welding components onto Chassis

  • Clamping tubes prior to welding

Aero:

• Finish prepping side panel molds - end of the week

• Begin material prep for side panels layup

  • blocked by no driver - see if we have a driver???

  • drawings are ready

• Make a decision if we want to layup both - yes to both

• finish side panel molds 3, 4

• b bulkheads sand, potentially make blank and machine second mold as well (based on SDC)

  • first b-bulkhead sanded

  • second b-bulkhead - in progress

Composites:

• infusion testing Saturday

• Double check prep work for the infusion testing session (Friday)

  • use mold release/PVA, don’t apply Loctite

July 19 - 25

Chassis:

• Pick up waterjet parts - Early this week

• Submit work request and drop off parts at E3

• Sand chassis and (maybe) tack weld seatbelt mounts

Aero:

• visit cold storage to pick up adhesive film

• chassis measurements for b-bulkhead

• layup on thursday

  • mold release on side panel 1 and 2

  • connect the molds

  • material prep (nomex, vacuum bag, breather cloth, peel ply)

  • pick up kerosene

  • trim carbon fibre and adhesive film

Battery Box:

Composites:

• next infusion test - Michael

  • next week

  • for this week, prep materials

July 26 - Aug 1

04 Jul 2021

Micah Black

Continued Battery Spot Welding

July 8, 2021

Mackenzie Lui, Kyle Lacson

Transport excess material to cold storage facility, set up paint guns.

Paint guns