DRI	Reviewers
Isha Warikoo	Kimberly Liu

1.0 Mounting Methods & Locations

1.1 Hood Mounting Methods & Locations

Table 1: Proposed Mounting Locations & Method for the Hood Panel

Bonding to Adjacent Panels	Method	Validation/Rationale
Headlights	Epoxy Adhesive	Bonding area calculations (Excel attached, below)
Windshield	Quarter-turn fasteners	Windshield must be removeable, quarter-turn fasteners will be used for windshield mounting to other panels
Bottom Panels	Epoxy Adhesive	Modify hood panel to have inward curve along the bottom edge to allow the panel to join with the bottom panel.

Hood-headlight bonding area validation:

Table 2: Proposed Mounting Locations & Method for the Windshield Panel

Bonding to Adjacent Panels	Method	Validation/Rationale (In progress)
Hood	Quarter-turn fasteners	Windshield must be easy to remove
Side Panels	Quarter-turn fasteners	Windshield must be easy to remove
Front Bridge	Quarter-turn fasteners	Windshield must be easy to remove