Dashboard Project

everything in purple we basically need to see on the dash

kill switch = red button - something's going wrong, stop the car button

p indicator switch = parking indicator switch

• ignore this, doesn't affect dash

there should be a power switch, but not currently on diagram

P LED = indicates we're in park

already purchased D, N, R, (can’t remember if there was another button they already have - Renzo Villanoy do you remember which other one they said ?? if not, will ask again)

fan control: knobs you can turn to certain point and it clicks on

• needs to be accessible on the dash for driver and passenger - will be circular holes on the dash for the knobs to poke through

AUX, Race/Normal

• Race mode will turn off infotainment - does not need to be super accessible

  • switching between race/normal ideally similar to switching between eco and non eco mode

• VEH CAN --> DB9

• Pi USB --> Type A

• USB C charger output --> USB C

Fault LED --> when that LED is on, activates something outside and also on top of car

Fans 1-4 will be mounted on the dash and wiring will run through on the inside

• fans on old car look similar to ones on a real car - direction control and stuff

• only fan control needs to be on rn

all blue squares are enclosures and all red boxes are connectors which need to fit on enclosures

• driver display area, infotainment display area easily accessible

front electronics enclosure should be accessible but does not need to be EASILY accessible - ie could be unscrewed or smth - don't want it to be a big box like old car

there will be slits on the front of the car which will be connected to the fans so there will always be airflow

driver display area has 4 screens --> all connects to the steering wheel

• driver display area should be parallel to driver

pedal board enclosure should be waterproof

can ignore side lights box

kill switch should be flush with car, just needs opening, should not be easily pressed

(front driver, front passenger) side misc. --> adrian has ideas for it already, talk to adrian about it

basically: we're taking care of pedal board enclosure, front electronics enclosure, infotainment display area, driver display area