I am making this page mainly to keep track of relevant links for heat set inserts.
When using them, you should ensure to check that the torque or pulling force you require for the bolt does not exceed the torque-out or pull-out ratings of the heat set insert for the specific type of plastic that it is being installed in.
Using Inserts in 3D Printed Materials
https://hackaday.com/2019/02/28/threading-3d-printed-parts-how-to-use-heat-set-inserts/
https://markforged.com/blog/heat-set-inserts/
Heat Set Inserts and Material Details
https://www.pemnet.com/bulletins_A4/sidata_A4.pdf
https://www.spirol.com/library/sub_catalogs/ins-Testing_and_Performance_us.pdf
https://www.engineeringtoolbox.com/metric-bolts-minimum-ultimate-tensile-proof-loads-d_2026.html
https://dental-media.formlabs.com/datasheets/Standard-DataSheet.pdf