Added:
4 connectors for thermistors to FET gates for precharge and discharge, and power resistors
Comparators, and an optoisolator for thermistor circuit
2 FETs on the isolating DC-DC to turn off the isolated side through firmware (normally on/closed)
2 connectors and circuitry for fans to cool motor controllers
LED on discharge circuit
Additional inputs to MCU for data logging
Changed:
Power resistor values
Additional thermistor output to shut off precharge (aside from precharge complete)
Components added to library:
RES 1K OHM 15W 1% TO126
RES 5K OHM 25W 1% TO220
IC MUX 1 Circuit IC Switch 2:1 3Ohm SC-70-6 (not used)
Footprints added to library:
RES TO-126-2
RES TO-220-2
IC MUX 1 Circuit IC Switch 2:1 3Ohm SC-70-6