Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

We’re going to be testing using the ASTM D5868

ASTM D5868

Equipment:

  • Compression fixture

  • Strain-indicating device

  • Special alignment jig

  • Bonded Resistance Strain Gauges

  • Emery cloth

  • I believe UTM

  • Conditioning chamber

  • Environmental test chamber

  • Extensometer

Procedures:

  • Apply the adhesive in accordance with the adhesive suppliers' recommendations. 

  • Adhesive Cure—Cure the adhesive at room temperature or elevated temperature using prescribed conditions determined by the adhesive supplier.

  • Condition the test specimens

  • Place specimens in UTM

  • Wait for failure

Variable

Quantity

Grip Separation

75mm

load rate

13mm/min

  • No labels