Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

This is a brainstorming page for all initial sketches and SolidWorks models for the chassis design. 


ArtistSketchComments

Angela Chao

Rough Sketch

Rough CAD Outline:


Ritu Shah

Total outline:

Basic outline without cross members:

  • 4 hoops
  • Straight beam at the base (I beam) for support
  • Additional cross beams added to base for mounting points
  • Cross behind driver seating area
  • Triangular beams along sides, except at door area

Matt Suski

-All members triangulated

-7 hoops, one main, front roll hoop rear roll hoop, front wheel and rear wheel hoop, front bulkhead and rear bulkhead

-main hoop is one curved tube, with no bends (recommended by Student Formula Design Teams document)

-Three horizontal beams on the front and back to mount the control arms to

-door would be placed between main hoop and front roll hoop


  • No labels