...
- For 2-layer boards, all vias >= 0.3mm hole, 0.6mm diameter
- For 4-layer boards, all vias >= 0.2mm hole, 0.45mm diameter
- Make sure vias do not interfere with internal layers (DRC should catch this)
- Thermal vias should be small and numerous - we want the greatest surface area between planes as possible
- For critical power traces, use multiple vias in parallel to reduce inductance and resistance
- In general for vias, make the diameter 2x the size of the hole.
Board - Layers
- Make sure there is a keep out layer surrounding your board.
- Make sure all these layers are selected when generating your gerbers.
...
- All components are labeled in a logical manner
- Connectors are labelled
- MSXIV Logo is on the board
- Correct board Rev is listed
- Pin 1 labeled on all ICs
- Ensure bottom silkscreen is mirrored
- Optional parts (such as CAN termination) is labeled
- Ensure all polarized components are labelled
- Double-check all of silkscreen in 3D mode
...