Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Section

Members involved

1 (FSU + foot compartment)

Brittany Jin Kevin Hu

2 (Occupant Cell: Side Collisions)

Kevin Tu Damon Yang

2 (Occupant Cell: Rollcage)

Joy Ge Joy Jia Kelvin Huynh

3 (Battery box)

Jeremy Siu Samual Wong

4 (RSU + Aerobody integration)

  • subject to change

  • Section 4 currently combined with Sec 3

  • Note: occupant cell is also split into rollcage and side collision cases, so members will be split up further in parts they are responsible for

...

  1. Each person updates their full chassis assembly (from Bild) per week in the design sprint period

    except for people responsible for only the rollcage

Expand
titleGetting Updated Files from Bild

When you are on Bild, these are the available files for you

image-20250205-213445.png

Open the CHA000 top level assembly - you should be prompted that the file is read-only, continue opening the file but do not check it out on Bild

image-20250205-213620.png

If you are prompted that the space claim file is missing, you will have to download that as well

  • Go into MSXVI → misc → Space claim and download MSX6-FUL001-Space claim assembly

  • DO NOT DOWNLOAD MS16-FUL002, that is the WRONG file

  • Close and reopen the CHA000 assembly, your file should be updated with the space claim file

  • If its still missing, choose “browse for the missing component” and choose the location where you downloaded the space claim assembly in your documents

image-20250206-024631.pngImage Added
  • The Bild version is the version with accepted changes to the final assembly, do not check it out and update unless prompted with proper version control

    image-20250205-213818.png

Once you have the file open, you can make a local copy in your computer for development using pack and go

image-20250205-213856.png

Choose a directory to save your development file that is not your Bild folder

image-20250205-214227.png

Now open the new assembly in your directory and work in that assembly!

Remember to update your assembly with the updated chassis when you are prompted to do so!

...

  • Make your own confluence page under this section with your name and section, and populate the page with data as necessary Chassis FEA template

  1. Make changes to your section, rerun the FEA simulations on your newest configuration of the chassis, document the changes you made and why you made them in your confluence page

Expand
titleWeldment Profiles

By default, Solidworks has provided some standard weldment profiles when you create a structural member - you will soon realize the chassis files do not use them and refers to some external files!

To download the weldment profiles used for the chassis, go to Bild → MSXVI → Internal Structures → Chassis Development → Weldments and download the VR3 Weldments profile folder, save it in a place in your computer

You will have to tell Solidworks where they can find the new weldment profiles you want, so go back to Solidworks → options → system options → file locations

image-20250206-030200.pngImage Added

Show folders for weldment profiles

image-20250206-030243.pngImage Added

Add the directory where you saved your weldment profiles

image-20250206-030320.pngImage Added

That’s it! You should be able to use VR3 weldments for your chassis development files from now on!

image-20250206-030404.pngImage Added

  • The changes doesn’t have to necessarily be due to less stress concentrations! If it’s a change for integration efforts of the chassis - that is something that should be proposed too!

...