MPPTs
29-06-2023: Preliminary MPPT Testing
Tested one of the MPPT boards using a power supply (Sparky) and load (Rigol DL3031)
Load set to 25V, power supply to 2A and set to ~8V (max 15V)
Power output around 16W, an efficiency of ~91-92%
Conditions: cloudy, no direct sun, ~22°
Replaced the power supply with a large solar panel
Voltage around 6V and current 7.78mA
Load: ~25V; 0.027A; 0.6-0.7W
Another panel connected in series, power output increased to ~0.6W
When the protective layer from the larger solar panel was removed, increased power output to 0.83W-1.0W
...
Board | Current Progress | Previous Documentation |
---|---|---|
DCDC | ||
PD |
05-2023
During the test, the capacitor discharge circuit started smoking
Once working, DCDC output max is 10.6-10.7V
6-2023
Replaced R8 to 10k ohms resistor, but seems like the resistor removed was 10k
Connected back to the power supply and load no change in output voltage
PD
04-07-2023
...
Controller Boards | FW Progress: Table of Boards | |
UV |
Testing
Project | Current Progress | Previous Documentation |
---|---|---|
MPPT | ||
Motor Testing | ||
Power Consumption | ||