...
Journal entries should be in reverse chronological order.
2017-02-04 Matt, Adam and Devon Front Suspension Review
Decided on 0 toe, 1 degree positive camber, 5 degrees of caster. We also decided to make the hard points on the chassis vertically aligned. Adam will work on designing uprights - to be done by end of February.
2017-01-07 Matt and Devon Front Suspension Review
Matt and Devon met to review front suspension. Concluded that process for optimization is reasonable and the geometry is good. One ECO was decided on: increase the separation between upper and lower control arms.
2016-10-23 Did analysis on turning radius
...