Folder Path:

D:\Users\Roo\Documents\GrabCAD\MSXIV sims\MS-CHASSIS\Spring 2021 Reinforcement Sims

File Name:

September 19_Rev9.0

This project file was created using Rev 7.0 as the base project.

All 4 passenger masses were turned on.

...

Learning Note

Had difficulty setting up the solids (gussets and sheet metal) which caused solver pivot errors.

Learned that solids need to intersect the beam elements or be very close so that the bonded contacts work properly and solve.

An approximate fix for the back bar case could be to move the collision object close enough so that it intersects the C plane and solve.

Front Bar - Passes

...

Back Bar (Failed to Compile) - Need to fix

Failed to compile solution.

There were contacts between the collision object and chassis tubes that were marked as red (by the contact tool). These have not yet been resolved.

Side 30 Wall

...

Side 60 Wall

...

A Pillar

...

B Pillar - Passes

...

C Pillar - Need to fix back tubes

Front 30 Wall

...

Front 60 Wall

...

Top 60 Wall

...

Top

...

Top 30 Wall

...

Combined Loading (Roll-Over) - Incomplete

It is the case with the pucks.

It needs to be setup using previous examples.

Advisor: Jason He

It is slightly lower priority because the combined loading condition could be interpreted as an average of multiple cases listed above.