...
Part Number | Part Name | Qty |
|---|---|---|
1 | MSXIV-STR004-Rack extension | 1 |
2 | MSXIV-STR010-Rack Extension Clevis | 1 |
3 | Rack mount assem (config 1 and 2) | 2 |
4 | Unthreaded spacers for tube 3/4" | 2 |
5 | MSXIV-STR009-Steering Stops | 2 |
6 | M6 x 1 - 35 SHCS (91290A334) | 2 |
7 | M6 lock nut (94645A205) | 2 |
...
Assembly Instructions
Weld the middle spacer (#4) to the rack extension, follow the Rack Extension/Centerlink Welding Jig guide.
Slide on the left rack mount (#3, config 2), place the mount approximately in the middle of the two spacer holes.
Weld on the left spacer (#4) by repeating step 1.
Slide on 2x #5 and 1x #3, config 1 in the correct order on the right side of the rack extension. Where the components sit do not matter currently, make sure all three components sit between the middle spacer (#4) and the rightmost steering stop (#5) hole.
Weld the clevis (#2) onto #1. No jig is required the tube and clevis is slide fit and the flat face of the tube sits onto the flat surface of the mating hole on the clevis.
Fix the steering stops to their respective mounting holes using #6 and #7.
Done
