...
We should be able to manually turn the battery on or off. Should be rated for at least 20A, probably more for a safety factor. Should also be satisfying to turn on - big switches are nice.
Current Sense
Should we have the option of switching in a larger current sense resistor to measure the current more accurately - then we might not have to change current set points when switching code as the reading scales according to the resistor chosen.
Connectors + Cables
- 12V Input - Molex Ultrafit, 2 pin, +/- consistent with the rest of the boards, 22AWG
- CAN - 2 ports, with BMS carrier in Daisy Chain Config - Molex Duraclik 2 pin, consistent with the rest of the boards, 22AWG
- Charge Input - 2-pin Molex MX150L, 14AWG
- Power Output - 2-pin Molex MX150L, 14AWG