...
Fill this out with the definitions for the various heating times for the Qinsi QS-5100
I do not believe that the rate of heat rise of cooling is controllable from the settings, just the time that it stays at the set temperature.
- Heat
- Solder
- etc.
Recommended Heating Profile
The following figure is from the CHIPQUIK TS391AX50 data sheet. It outlines the recommended profile for the solder paste.
Tips
- Don't place items directly on the metal rack, raise them with pieces of unused PCBs (from the EEVBlog post)
- etc.
...
It would be great if we could also map a temperature distribution of the PCBs and the oven as well.
Test Results
The following figure shows the temperature of the center of an old PCB over time.
The desired temperature is reached, but temperature is not stable between peaks which could affect the quality of the solder.
