...
- Through-holes still need to be widened
- The C6 inputs on both connectors should be fused or one should be removed - I recommend removing one and switching to a 6-pin duraclik to prevent plugging in harnesses the wrong way
- Still need to use smaller analog mux
- ICMP and IBIAS pins are flipped - Should be IBIAS → resistor → ICMP → resistor → GND
- Silkscreen for connectors, silkscreen for daisy-chain direction
- Use Vref2 for the external thermistor? It's at 3V nominal and seems to be designed for thermistors.
- Replace the 10k resistors for thermistors with a resistor array?
- Remove outdated note in isoSPI Interface sheet
- Missing 100ohm and capacitor on C0?
...