WIP
Force: 1Kn in X direction
FEA Steps
Step 1:
Take your part, and create a dummy part.
Step 2:
Determine the area where the stress is being applied to the part, and create a split line on the part’s face
...
Step 3:
Create split lines on the where the part is fastened and the stress “exits”
...
Step 4:
Go to Simulation → New Study → Static and start your FEA
Step 5:
Add fixtures to the split lines from step 3
...
Step 6:
Add desired forces to the split lines from step 2
...
Step 7:
Document final FEA results
...