...
- Dura-clik crimp tool, crimps, ISL retainers, receptacles etc etc
Follow-up
Array
- Slightly behind schedule, but we should still have our preliminary layout done by the end of August
Battery
- Behind schedule, cells have arrived, but we still need parts from mechanical to prototype
BMS
- Hardware
- Rev 1 is working, but we need to re-spin for some minor changes
- Software
- ADC driver is mostly done, the actual application code is fairly straight forward other than SOC, and it can be done next term
Power Distribution
- Hardware
- Rev 1 was mostly functional, Rev 2 has been ordered and planned to be populated by the end of Aug
- Software
- Software should also be mostly done by the end of August
Driver Controls
- Hardware
- Rev 1 of Driver Controls Carrier and Peripheral were sent out, and should be tested by the end of the term
- Software
- Good progress has been made. Some changes have to be done, but should be good for testing.
SWD Adapter
- Hardware is finished and fully functional
DCDC (TBD)
- Still scheduled to be done by Fall 2017
Aux BMS
- Behind schedule, but should be done by end of Fall 2017
Motor Interface Board
- Hardware
- Hardware should be complete by the end of the term
- Software
- TBD, but it should be done by Nov 2017
Lights
- Hardware
- Lights have been mostly chosen, should be done by end of Fall 2017
- Software
- Done by end of next term
Telemetry
- Hardware
- Eval boards for now
- Software
- Jan 2018 is still a good deadline
Solar Interface
- Hardware
- We need 2 solar masters, and each will control maybe 2 relays